For Aluminum composite panel and Color Coated Aluminum Coil (pre-painting aluminum coil)
1. Strict Inspection of Raw Materials
We cooperate with German Henkel as our pretreatment material, PPG in America or Sweden Becker as PVDF supplier, Valspar Corp as Polyester supplier. All raw materials are approved by the companies so that the quality is ensured.
2. Meet International Quality Standard
• Entirely abide by ISO9001 international standard quality system
• Raw material and coil coatings from the famous companies, the quality is ensured.
• Avanced production equipments without damaging the paint
• Production process environmental friendly
• Strict quality control and testing
3. Environmental Protection
• The treatment of hazardous chemicals, paints and solvents is eliminated.
• Waste disposal and treatment is considerably reduced.
• The possibility of fume production during the paint curing and welding is eliminated in the fabricator's workshop
• Coils are reproducible and recycle
4. Economic Benefits
• More efficient use of paint on pre-painted material.
• Smaller labor force required. By the modern auto-coil coating production line
• Less factory space required due to reduction in storage areas.
• Reduced energy consumption (no pretreatment or paint processes). And a cutting-edge energy system
• No waste treatment plant required.
• Reduced product development cost.
• Lower capital investment requirements.
• Fewer inventories held.
• Lower re-work costs.
For Silicone sealant
• Good electrical insulation. Because silicone can be formulated to be electrically insulative or conductive, it is suitable for a wide range of electrical applications.
• Thermal stability (constancy of properties over a wide operating range of −100 to 250 °C).
• Though not a hydrophobe, it has the ability to repel water and form watertight seals.
• Excellent resistance to oxygen, ozone and UV light (sunlight). This has led to widespread use in the construction industry (e.g. coatings, fire protection, glazing seals), and automotive industry (external gaskets, external trim).
• Low chemical reactivity.
• Low toxicity, but does not support microbiological growth.
• High gas permeability: at room temperature (25 degree) the permeability of silicone rubber for gases like oxygen is approximately 400 times (citation needed) that of butyl rubber, making silicone useful for medical applications that could benefit from increased aeration. Silicone rubbers cannot be used where gas-tight seals are necessary
 |
 |
